Exterior Wood Finish Application

Protect your wood with the finest wood stain available!

Penofin Exterior Wood Finish Application

Penofin transparent exterior finishes were formulated to safeguard the natural beauty of wood and to prevent discoloration from the sun's ultraviolet rays. Penofin resists stains and retards the bleeding of nails.

Application: Shake product well and/or stir thoroughly. Do not thin or blend with other products. Do not apply in direct, hot sun. Disneyland deck picture

Penofin 350 VOC product one-coat application process: Apply one coat with brush or sprayer to a clean, dry, unfinished wood surface which may be kiln dried or seasoned.

Penofin 550 VOC product two-coat application process: Apply two coats with brush or sprayer to a clean, dry, unfinished surface which may be kiln dried or seasoned. Two-coat applications require a minimum of three hours drying time between applications.

Note: Do not overapply. Wipe off excess 30 minutes after coating or excess oil will congeal on the surface and result in a tacky finish. Surface is ready to use 12 hours after coatings.

Do not prepare surface with steel wool. When redwood, cedar, and other woods are exposed to wet metal, a reaction with the tannic acid in the wood may occur which can turn the wood dark upon subsequent exposure to moisture.

Coverage: Coverage will vary depending upon the surface texture, moisture content, and method of application. See label for more information.

Clean Up: Use paint thinner or mineral spirits.

Follow all label instructions carefully.